Works in progress.
A brick toy maxi figure for the kids to paint on during the next party. Head already sanded, chest needs sanding and both need priming. Arms are printing right now. Printed in petg.
The Ghostbusters sign in the background just needs to be mounted on the wall. Pla.
#Urlaub Tag 8.
Ich hasse die ersten zehn Minuten.
Und die letzten zehn Minuten.
Und die zehn Minuten dazwischen.
Chef? Ja. Ich glaub, mein #Urlaub ist irgendwie defekt. Bin diese Woche du viel gelaufen wir noch nie seit Beginn der Aufzeichnung.
Ja. Ja. Unbedingt. Nein. Ja, noch eine Woche. Gut, bis dann!
Fetti McFettFett war heute schon wieder 5km auf den #Crosstrainer. Guten Morgen!
#Urlaub Tag 3. Dieser Urlaub reißt die gesamte Home-Office Faulheit raus (jedenfalls was paseo angeht).
#Urlaub Tag 2, esse gerade beim drittes Fischbrötchen. Ja, ich bin hinter dem Schnitt, ich bemühe mich.
Has a bit of filament left on the spool, thought I'd be enough for two small parts.
Well, I was right. A few millimeters more, though, and the extruder motor would have run empty.
So after shorting a few data lines on the first try of flashing #OpenBeken I ordered a replacement BSEED light switch. The tradition of never getting two identical devices continues with this one. Instead of an ESP8266 or a WB3S it comes with a T34 chip. Luckily, OpenBeken supports it, too. Even more lucky, it has pads for GND, VCC, RX and TX (see image).
After flashing, I was able to configure the LED pins, relay pin and Btn pin easily.
My house is now completely de #Tuya|'d
#MFA Solution Architect, Casual Gamer, Coder.